HHB comm CDR-830 - Manual (Page 25)

25
4 Getting started
MONITOR
INPUT SELECTOR AUTO MANUAL
TITLE/MODE
TRACK NO. WRITE
DISPLAY
FINALIZE ERASE
SCROLL
CD TEXT
2
1
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PROFESSIONAL
4,6
5
4,6
3
ENTER
CURSOR
MENU/ DELETE TEXT MARK
SET CLEAR
TITLE /MODE
7
1 ¡
8
3
4 ¢
A B C D E F
G H I M N O J K L
P Q R S T U V W X Y Z
REC SYNCHRO
REPEAT RANDOM NAME CLIP
INPUT SELECTER
FADER
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
SKIP ID
PROGRAM CHECK CLEAR
AUTO/
MANUAL
1 2 3
4 5 6
7 8 9
10/0 >10
SCROLL
DISPLAY
•
5
3
2
Setting the
balance
You can increase the relative
volume of the right or left channel
for both recording and playback.
However, it should not be
necessary to change the balance
of a pre-recorded source.
1 Press INPUT SELECTOR to
choose an input.
Pressing INPUT SELECTOR
repeatedly switches the active
input:
Analog - Optical - Coaxial
The recorder’s display indicates
the current input.
2 Make sure the recorder is
stopped, then press
RECORD
¶ ¶ ¶ ¶ ¶ ( ¶ ¶ ¶ ¶ ¶ REC on the
remote control).
The recorder goes into record-
pause. (You can also press
MONITOR .)
3 Press MENU/DELETE.
4 Turn the jog dial until
BALANCE appears in the
display, then press to
ENTER.
5 Adjust the balance using
the REC BALANCE buttons
(
1 1 1 1 1 and ¡ ¡ ¡ ¡ ¡).
You can adjust the balance from
0dB (default) to around 5dB in
either direction for digital
recording, and up to around 7dB
in either direction for analog
recording.
• Pressing the jog dial ( ENTER )
and holding for 3 seconds
resets to center position.
6 Press the jog dial (ENTER)
to confirm the balance.