Emerson Radio NR305TT - Manual (Page 13)

12
PLAYING CASSETTE TAPES
Note: Before inserting a tape in the player be sure that there is no excess
slack in the cassette that could become jammed in the mechanism. Refer to
the Care and Maintenance section for instructions on removing excess slack
from the cassette.
1.) Rotate the ON/OFF-VOLUME control clockwise until a ‘click’ is heard and set
the Volume to a low level.
2.) Insert your cassette into the slot, as shown in the illustration, with the side you
wish to play facing ‘up’ and the open end on the right side.
Note: There is no ‘TAPE’ position on the Function selector. When you
insert a cassette onto the player the system automatically switches to the
Tape mode.
3.) Cassette playback begins as soon as the tape is inserted. Adjust the ON/OFF-
VOLUME control to the desired level.
4.) To advance the tape rapidly, depress the EJ/FF (Eject/Fast Forward)
button approximately half way. The tape will move forward rapidly
as long as the button is depressed. Normal playback will resume
when the button is released.
5.) When the tape ends the player stops automatically. Depress the
EJ/FF (Eject/Fast Forward) button completely to remove the
cassette from the player. You may press the EJ/FF (Eject/Fast
Forward) button to stop playback and remove the cassette at any
time.
6.) To turn the system ‘off, rotate the ON/OFF-VOLUME control counter clockwise
until a ‘click’ is heard.
+
+ +
+
Cassette Tape
Open End
E J
/
F.F
E J
/
F.F
NR305TT_050704.p65 7/5/2004, 10:31 12