Emerson EM266 - Manual (Page 2)

www.emersonphones.com
Distributed by Southern Telecom Inc. Brooklyn, NY 11232
© 2010 Southern Telecom Inc. All rights reserved.
Emerson and the G-Clef logo are registered trademarks of
Emerson Radio Corp. Parsippany, New Jersey USA.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
SONY PlayStatiion® & PS3™ are either trademarks or registered
trademarks of SONY.
All other trademarks are trademarks of their respective owners.
Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within one (1) year from your
original date of purchase return it to the authorized service
center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
• Provide proof of the date of purchase within the package
(Dated bill of sale).
• Prepay all shipping costs to the authorized service center,
and remember to insure your return.
• Include a return shipping address (no P.O. Boxes),
a telephone contact number, and the defective unit within
the package.
• Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same
or similar model of equal value if examination by the service center
determines this product is defective. Products received damaged
as a result of shipping will require you to file a claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident,
misuse, abuse, improper installation or operation, lack of reasonable
care, and unauthorized modification. This warranty is voided in
the event any unauthorized person opens, alters or repairs this
product. All products being returned to the authorized service
center for repair must be suitably packaged.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE
HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
GIVEN BY SOUTHERN TELECOM INC. IT’S AGENTS, OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE
SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY
IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SOUTHERN
TELECOM INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER
OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED
BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts so the above limitations or exclusions may not apply
to you. This warranty gives you specific legal rights, and you
also may have other rights that vary from state to state.
Should you have any questions or problems concerning this
product, please contact our customer service department at:
1-877-768-8483 (Toll Free)
Monday - Thursday: 9AM - 5PM (EST)
Friday: 9AM - 3PM (EST)
or
via e-mail at
[email protected]
Southern Telecom, Inc.
ATTN: Returns Department
14-C 53rd Street
Brooklyn, NY 11232
The shipping address of the authorized service center is:
FCC Part 15
This equipment has been tested and found to comply with the
requirements for a Class B digital device under Part 15 of the
Federal Communications Commission (FCC) rules. These
requirements are intended to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Do not attempt to repair or modify this equipment.
Warning: Changes or modifications to this equipment not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: For the best audio quality, always wear your Bluetooth
Headset on the same side of the body as your mobile phone
For added comfort and noise suppression, 3 silicone cushions
are included with your Bluetooth Headset. Choose the silicone
cushion (S) (M) (L), which fits most comfortably in your ear, and
insert it on the Bluetooth Headset as shown in the diagram below.
You may wear your headset with or without the provided
earhook. If you choose to wear your headset with the earhook,
connect it to the headset as shown in the diagrams below.
Wearing your Bluetooth Headset Stereo Bluetooth Troubleshooting tips Warranty information
Silicone cushions
S M L
Left ear Right ear
Fits either ear
comfortably
This headset allows you to listen (in full stereo) and control* the
music on your Bluetooth enabled mobile phone, gaming
console, computer or mp3 player and supports the following
Bluetooth profiles:
• A2DP - Advanced Audio Distribution Profile
• AVRCP - Audio/Video Remote Control Profile
• HSP - Headset Profile
• HFP - Handsfree Profile
To use the headset to listen/control music, your Bluetooth enabled
device must support the A2DP and AVRCP profiles. Please refer to the
user guide of your Bluetooth enabled device for more information.
Connect the Stereo Earphone to the Bluetooth Headset’s
charging socket as shown below.
Insert the Bluetooth Headset in one ear, and wrap the Stereo
Earphone behind your neck and insert it into your other ear.
To enjoy wireless music on your Bluetooth Headset, press the
[PLAY] button of your Bluetooth enabled device to begin music
playback. Once playback has begun, you can control the music or
answer phone calls from the control buttons of the headset (Not
all mobile phones support the control of music using Bluetooth).
Adjusting the volume
Press the [VOLUME UP] or [VOLUME DOWN] button to adjust
the volume to the desired level.
NOTE: You may also adjust the volume from your mobile
phone’s volume control.
Play/Pause* (music)
While the music is playing, press the [POWER] button to pause the
music. To resume music playback, press the [POWER] button again.
Skipping or searching songs*
(Dependent on your phone supporting this feature)
While the music is playing, press the [ VOLUME UP] button
to go to the previous song, or press the [ VOLUME DOWN]
button to go to the next song.
Answering a call while listening to music
During an incoming call, press the [POWER] button to answer.
Press the [POWER] button again to end the call and return to
the music.
*Certain Bluetooth features including those listed may not
be supported by all compatible Bluetooth-enabled devices,
and/or the functionality of such features may be limited in
certain devices.
Stereo
Earphone
Previous song
VOLUME UP
Next song
VOLUME DOWN
PLAY/PAUSE (music)
ANSWER/END (calls)
Redialing the last number called (Dependent
on your phone supporting this feature)
Double press the [POWER] button and release. The headset
will emit a confirmation tone, and the last number called will
be redialed.
Adjusting the volume
Press the [VOLUME UP] or [VOLUME
DOWN] button to adjust the volume
to the desired level.
NOTE: You may also adjust the volume
from your mobile phone’s
volume control.
Powering ON/OFF
• To turn ON, press and hold the [POWER] button until the
BLUE LED indicator light turns on.
• To turn OFF, press and hold the [POWER] button until the
BLUE LED indicator light flashes quickly several times, and
then shuts off.
Answering/Ending a call
• To answer a call, press and release
the [POWER] button.
• To end a call, press and release the
[POWER] button.
Rejecting an incoming call
During an incoming call, press and
HOLD the [POWER] button until
you hear the confirmation tone.
To make a call
Dial the number and press the send
button on your mobile phone, the
call is automatically transferred to
the headset.
Using your Bluetooth Headset
Playing music
FCC and telephone company information
VOLUME
DOWN
VOLUME UP
Indicator
light
Power button
Answer/end a call
After successfully pairing my mobile phone and Bluetooth
Headset, when I shut my phone and turn it on again, my
headset did not automatically connect.
• Try turning the headset OFF, and then turning them ON again.
• Many mobile phones have an auto reconnect option when first
attempting to reconnect to a newly paired Bluetooth device.
Make sure you accept this option, so that the headset
automatically reconnects to your mobile phone; check the
user guide of your mobile phone for more information regarding
this option.
• Try unpairing the headset from your phone, and repeat the
pairing procedure.
The sound is very low.
• Try adjusting the volume by using the [Volume] button on your
headset; make sure the volume on your mobile phone is
turned up as well.
I cannot get the Bluetooth Headset into Pairing Mode.
• Make sure the Bluetooth Headset are turned off before
beginning the pairing process.
• Press and HOLD the [POWER] button until the BLUE indicator
light turns on, flashes several times, and becomes a steady
blue. The headset is now in Pairing Mode, and is ready to
connect to your mobile phone.
My iPhone is paired correctly and I hear music but I cannot
control (play, pause, next song, previous song) the music
using the controls on the Bluetooth Headset.
• At the time of this User’s Guide publication, the iPhone only
supports the playback of music using Bluetooth, and does not
support the control of the music using Bluetooth.
My mobile phone is not able to pair with the Bluetooth
Headset.
• Make sure that you fully charged the headset before pairing.
• Keep your headset and mobile phone within 3 feet of each
other during the pairing process.
• Check that your phone’s Bluetooth feature is turned ON.
• Try repeating the pairing process, see “Pairing the headset
with a Bluetooth enabled device.”
• Make sure your Bluetooth device supports A2DP profile.
• When playing music on some mobile phones, the music will be
transmitted to the phone’s speaker instead of the headset. Select
“Transmit sound via Bluetooth” in the phone’s Bluetooth settings,
then select “EM266” as the speaker device.
I Can pair the Bluetooth Headset with my Bluetooth
device, but I cannot hear any music?
Charging
socket