beautypg.com

How to maintain your vacuum cleaner – Eureka 3276-3280 User Manual

Page 6

background image

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

4

1) Lower handle to floor and remove

HEPA filter (Fig. 7).

2) Unscrew the lens and remove old bulb.

Replace with bulb rated 12 v., 10 w.,
Type 904.

3) Push in new bulb, replace lens cover

and replace screw (Fig. 8).

4) Replace HEPA filter and return to

upright position.

Change Light Bulb

Make sure vacuum is turned off and power cord is unplugged.

How to replace brush roll or belt

1) Use handle release to lower handle flat

onto floor (Fig. 1).

2) Remove 2 screws from brush roll cover.

(Fig. 2).

3) Lift off brush roll cover. (Fig. 3).

4) Remove brush roll and belt. Thread new

belt around motor shaft and brush roll
(Fig. 4).

5) Insert left end of brush roll first. Make

sure end cap fits into base (Fig. 5). Pull
right side of brush roll to stretch belt
and insert right end cap into base.
Make sure it slides into position.

6) Rotate brush roll 2 turns to center belt.

7) Replace brush roll cover (Fig. 3).

8) Replace 2 screws (Fig. 6).

!

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 1

How to Maintain Your Vacuum Cleaner

Make sure vacuum cleaner is turned off and power cord is unplugged

Check EXT-U Belt. Replace if worn, cut or out of shape

Avoid touching the motor shaft when checking brush roll or belt.

!

!

Maintain Brush Roll

Motor can become hot with normal use.
Do not remove end caps. Remove hair and threads from brush roll periodically.