Equator CRF 1200 W - Manual (Page 8)

8
2) Remove the middle
hinge. Lift off the bottom
door. Re-attach the
hinge screws.
1) Remove top hinge and set
aside. Lift upper door off of
mounting peg and
remove.
4) Remove the screws in the
middle of the new side.
Mount the bottom door
and attach the hinge.
7) Top door adjustment:
Loosen the screws in
the door hinge on top
of the door. Loosen the
hinge above the door
and turn the hinge to
the desired position.
Tighten the screws.
8) Move the handle.
9. CHANGE OF HINGE SIDE
3) Remove the kick panel.
a) Only for appliances
with a door closer on
the bottom door. The
door closer is moved
to the second hole.
b) The bottom hinge is
dismounted at the 3
screws. The hinge is
turned 90° and
mounted
on the opposite side.
6) Bottom door adjustment: Move the
4 screws in the bottom angle iron
to the desired side. Tighten
screws and mount the
skirting board.
5) Adjusting the bottom door: Loosen the
3 screws in the bottom hinge and push
the bottom hinge
to the required
side. Tighten the
screws and mount
the kick panel.
13