England's Stove Works 55-SHPEPI - Manual (Page 35)

Page | 35
BIWEEKLY MAINTENANCE
Important Notes
 As with any maintenance concerning this unit, be sure the unit is “OFF,” has
completed the Shut-Down cycle, and is completely cool BEFORE
beginning.
 Be aware that metal parts in the firebox can remain HOT long after the fire
has gone out and EVEN after the Shut-Down cycle is complete. Always use
extreme caution when handling potentially hot stove parts, even if you think
they should be cold.
 Biweekly maintenance should include the steps listed in this section AS
WELL AS the steps listed in the previous “Daily Maintenance” section.
 Burning some brands of pellets may lead to increased ash build-up behind
the baffle and in the igniter tube. Diligent maintenance in the first year will
help you understand the location of ash build-up as well as the necessary
intervals between cleanings.
 Although not specifically listed in this section, the gaskets and latches on
both the main door and ash pan should always be inspected to ensure a
proper seal is being made. As previously mentioned, an airtight seal at all
stove openings is crucial to proper operation.
 When using a utility type vacuum for ash clean-out during biweekly
maintenance, be certain the vacuum is equipped with a filter capable of
preventing fine ash particles from being blown into the room. Similarly,
always be certain the stove is completely cool and that ALL ashes are cool
before vacuuming.
 Clean-out tees and other low spots in venting systems are areas prone to fly
ash accumulation. Be certain these areas are inspected frequently for
excessive ash accumulation.