Attaching iron to the ironing board, Fig. 14 – Euro-Pro EP484 User Manual
Page 15
15
ATTACHING IRON TO THE IRONING BOARD
Your iron is equipped with a clamp that can be used to attach the iron stand (12) to your ironing board (or
any other suitable surface). (Fig. 14.)
•
Rotate the clamp 90°, so that it points down.
• Place the iron stand (12) next to the edge of the table with the clamp on the bottom.
• Turn the wing nut clockwise and then tighten it to the ironing board or table.
• Reverse the process when finished ironing to remove the iron from the ironing board or table.
Fig. 14
SCREW
CLAMP
WING
NUT
IRONING BOARD