Eta-ecm20, eta-ecm20m specifications – ETA Systems ETA-ECM20M User Manual
Page 4
– 4 –
ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
ETA-ECM20, ETA-ECM20M SPECIFICATIONS
General
Type:
Power Conditioner Suppressor Module
Power Requirements:
120V 60Hz
Power Consumption:
.5W
RoHS Compliant:
Yes
Safety Approval:
MET (UL 1449 Code)
Panel
Switched Outlets:
Two, 20A
Spike & Surge Suppression:
H-N, N-G, H-G
Manual Override:
Slide switch
Extreme Voltage Shutdown:
ETA-ECM20M Model only, (EVS) Below 102V or Above
132V AC Line (When Used With ETA-ECS6RM)
Connectors:
5 Position Phoenix Euro Block Style
Fuse Protection:
20A Slow Blow
DCV Remote Trigger:
5 – 24DCV
Remote Trigger:
SPST Contact
Status Signals:
Output for Voltage and Current Data
(ETA-ECM20M model only)
Indicators:
Incoming AC, Active, AC Fault (ETA-ECM20M model only)
AC Mains Interconnect:
Screw terminal block
Technical Data:
Current Rating:
15 amps
Operating Voltage:
102 - 132 VAC
High Voltage Surge Protection:
Trigger at 133 VAC, 1ms typically
(When Used With ETA-ECS6RM) (ETA-ECM20M model only)
Spike & Surge Suppression:
H-N, N-G, H-G
Low Voltage Protection:
Trigger 101 VAC, 1ms typically
(When Used With ETA-ECS6RM) (ETA-ECM20M model only)
Spike Protection Modes:
Circuitry on incoming AC Mains.
Minimum Spike Clamping Voltage:
460 VRMS @ 3,000 amps
Maximum Spike Clamping Voltage:
6000V
Maximum Spike Clamping Response Time:
1 nanosecond
Spike Clamping Voltage @ 100A:
1250Vp for 20µs
Maximum surge current:
6,500 amps
Energy Rating @ 2ms:
600 Joules
Noise Attenuation EMI/RFI Sequencer:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
(ETA-ECM20M model only)
Temperature Range:
5º to 35º C
Humidity Range:
5% to 95% R.H.
Mechanical:
Chassis Finish:
Black
Mounting:
#8 5/16” self tapping screws
Dimensions:
3.0" H x 8.5" L x 3.5" W (7.6cm x 21.6 cm x 8.9cm)
Unit Weight:
ETA-ECM20=1.25 lbs(.68 kg), ETA-ECM20M=1.75 lbs(.80 kg)
©2009 ETA Systems All rights reserved. ETA003568 RevA 05/09
ETA-ECM20 & ETA-ECM20M
Electrical Control Module 20A Power Conditioner