Echo PPT-280 - Manual (Page 28)

28
lubrICaTIon
Flexible Drive Shaft
Level 1.
Parts required: POWER BLENDX TM 14 oz. or Lithium Based
Grease.
1. Loosen clamping screws (A) on driveshaft coupling.
2. Remove handle and flexible drive shaft.
3. Remove flexible drive shaft (B).
4. Wipe flex shaft clean and apply a thin coating of grease.
5. Slide flex shaft into handle. Leave 2 - 3 inches of flex shaft ex-
posed. DO NOT get dirt on flex shaft.
6. Align flexible drive shaft with drive shaft socket, and slide together
until handle is fully seated into drive shaft coupling.
7. Tighten clamping screws (A).
A
B
B