Electrolux 86720 - Manual (Page 18)

Operating Instructions
18
Running a Wash Cycle
Brief Instructions
A washing cycle consists of the following steps:
0
1. Set the correct washing program:
– select the program and the temperature with the program selector
– select additional program(s) if required
2. If necessary change the spin speed/select RINSE HOLD).
3. Set time delay if required.
4. Open the door, insert washing.
5. Shut the door.
6. Add detergent/conditioner.
7. Start washing program.
When the Washing Program has Finished:
Important! If the washing cycle ended with rinse hold, carry out a
PUMP OUT, SPIN or SHORT SPIN before opening the door.
8. Open the door, remove the washing.
9. Set the program selector to OFF.
10. We recommend you unplug the appliance and turn off the water sup-
ply when the wash program has finished.