Electrolux LAVAMAT BELLA 3450 - Manual (Page 27)

Instructions for use
27
Changing a Washing Program
Changing or aborting a program
0 1. Press button START/PAUSE.
2. Turn programme knob to OFF (AUS, ARRET). The washing program is
aborted.
3. If required, set a new washing program. Otherwise turn the programme
knob to PUMP OUT (PUMPEN, VIDANGE) and then press the button
START/PAUSE.
3 The washing program can be interrupted at any time with the button
START/PAUSE and continued by pressing the button again. Changing
the washing program is possible only after the programme knob was
turned to OFF (AUS, ARRET).
Select the Additional Program
The additional programs QUICK WASH (KURZ, COURT) or STAIN
(FLECKEN, TACHES) can also be selected after the program start.
0 1. Press the button START/PAUSE.
2. Press the button QUICK WASH (KURZ, COURT) or the button STAIN
(FLECKEN, TACHES).
3. Press the button START/PAUSE again. The washing program is contin-
ued.
Change the Spin Speed
During the washing program, the spin speed can still be changed or
RINSE HOLD (SPÜLSTOPP, SANS ESSOR.) can be set.
0 1. Press the button START/PAUSE.
2. Change the speed with the button Spin/RINSE HOLD (SPÜLSTOPP, SANS
ESSOR.).
3. Press the button START/PAUSE again. The washing program is contin-
ued.