Fisher & Paykel Series 7 Professional Series 36 Inch Gas Cooktop User Guide User Manual
Page 11
BURNER USE
Manual lighting
If there has been a power outage, the burners can be manually lit. If you have attempted
to light the burner with the ignition, allow 1 minute for any accumulated gas to dissipate
before manually lighting.
1
Carefully hold a battery operated lighter
near the desired burner.
When the burner is lit, turn the dial to any
setting between
HI
(high) and
SIM
(simmer).
When you have finished cooking, turn the
dial clockwise back to
OFF
.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
2
3
4
Push the dial in and turn counterclockwise
to
HI.
Hold the dial at
HI
before turning to a
flame setting.
11
This manual is related to the following products:
- Series 7 Professional Series 30 Inch Gas Cooktop User Guide Series 9 Professional Series 36 Inch Gas Cooktop User Guide Series 9 Professional Series 48 Inch Gas Rangetop User Guide Professional Series 48 Inch Gas Rangetop User Guide Professional Series 36 Inch Gas Rangetop User Guide Series 9 Professional Series 30 Inch Gas Rangetop User Guide Series 9 Professional Series 48 Inch Freestanding Gas Range User Guide Series 7 Professional Series 48 Inch Freestanding Professional Gas Range User Guide Series 7 Professional Series 36 Inch Freestanding Professional Gas Range User Guide