Ptional setting, C. change password – Emerson LC195EM87 User Manual
Page 24
24
EN
O
PTIONAL SETTING
C. Change Password
C. Change Password
Although the default code “0000” is supplied with the unit, you can set
your own password.
4
Use [Cursor K / L] to select “CHANGE PASSWORD”,
then press [ENTER].
e.g.) digital TV mode
or
- V - CHIP SETUP -
TV RATING
MPAA RATING
DOWNLOADABLE RATING
CHANGE PASSWORD
5
Press [the Number buttons] on the remote control to
enter the new 4-digit password.
• Enter password again in “CONFIRM PASSWORD”
space.
NEW PASSWORD
_ _ _ _
CONFIRM PASSWORD
_ _ _ _
6
Press [SETUP] to exit.
Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs. If you forget the
password, unplug the power cord for 10 seconds to restore
the password to 0000.
A81N1_N0UH_LC195EM87_82_EN.indd 24
A81N1_N0UH_LC195EM87_82_EN.indd 24
2007/07/25 14:15:09
2007/07/25 14:15:09