Eaton Electrical Cutler-Hammer CA03310002E - Manual (Page 10)

September 2003
10
For more information visit: www.cutler-hammer.eaton.com CA03310002E
NEMA Contactors & Starters
IT. Electro-Mechanical
Technical Data and Specifications
Table 6. Specifications
ᕃ Auxiliaries add approximately 1.0" (25 mm) to depth for single, 1.2" (30 mm) for dual.
ᕄ Non-reversing contactors and starters only.
ᕅ No load condition.
ᕆ Up to 99% humidity depending on application. Consult factory.
Description Size 00, 0 Size 1 Size 2 Size 3, 4 Size 5
Overall Dimensions in Inches (mm) ᕃ — w x h x d
Non-reversing
Contactor 1.8 x 4.4 x 2.4
(45 x 111 x 60) 2.1 x 4.4 x 2.4
(54 x 113 x 60) 3.0 x 5.9 x 3.1
(76 x 150 x 79) 4.1 x 8.0 x 3.5
(105 x 203 x 90) 5.6 x 14.0 x 7.0
(142 x 355 x 178)
Reversing
Contactor 3.8 x 5.9 x 2.7
(96 x 149 x 69) 4.5 x 5.9 x 2.6
(114 x 149 x 67) 6.2 x 7.4 x 3.3
(158 x 188 x 84) 8.5 x 9.5 x 3.8
(216 x 242 x 97) 11.7 x 17.2 x 7.0
(296 x 436 x 178)
Non-reversing
Starter 1.8 x 5.0 x 2.5
(45 x 127 x 63) 2.1 x 5.4 x 2.5
(54 x 138 x 63) 3.0 x 5.9 x 3.1
(76 x 150 x 79) 4.1 x 8.0 x 3.5
(105 x 203 x 90) 5.7 x 19.4 x 7.0
(145 x 492 x 178)
Reversing
Starter 3.8 x 5.9 x 2.7
(96 x 149 x 69) 4.5 x 5.9 x 2.6
(114 x 149 x 67) 6.2 x 7.4 x 3.3
(158 x 188 x 84) 8.5 x 9.5 x 3.8
(216 x 242 x 97) 11.8 x 21.0 x 7.0
(300 x 533 x 178)
Mounting Hole Spacing in Inches (mm) — w x h
Non-reversing
Contactor 1.33 x 4.0
(33.8 x 101) 1.46 x 4.10
(37 x 104) .94 x 2.87
(24 x 73) 1.33 x 4.13
(33.8 x 105) 1.75 x 13.0
(44.5 x 330)
Reversing
Contactor 3.15 x 5.35
(80 x 136) 3.15 x 5.35
(80 x 136) 5.51 x 6.89
(140 x 175) 7.87 x 9.06
(200 x 230) 7.82 x 13.0
(198.5 x 330)
Non-reversing
Starter 1.33 x 4.62
(33.8 x 117.3) 1.46 x 5.04
(37 x 128) .94 x 2.87
(24 x 73) 1.33 x 4.13
(33.8 x 105) 1.75 x 18.3
(44.5 x 465)
Reversing
Starter 3.15 x 5.35
(80 x 136) 3.15 x 5.35
(80 x 136) 5.51 x 6.89
(140 x 175) 7.87 x 9.06
(200 x 230) 7.82 x 18.3
(198.5 x 465)
Mounting Positions
Panel-Vertical Yes Yes Yes Yes Yes
Panel-Horizontal Yes Yes Yes Yes Yes
DIN Rail Mountable Yes ᕄ Yes ᕄ Yes ᕄ No No
Weights in Lb. (kg)
Non-reversing
Contactor .7
(.31) .9
(.42) 2.8
(1.27) 6.7
(3.05) 20.0
(9.1)
Reversing
Contactor 1.9
(.86) 2.6
(1.17) 6.9
(3.13) 16.9
(7.67) 48.0
(21.8)
Non-reversing
Starter .9
(.40) 1.2
(.53) 2.9
(1.32) 7.1
(3.20) 27.0
(12.3)
Reversing
Starter 2.0
(.90) 2.6
(1.20) 7.1
(3.20) 16.8
(7.60) 55.0
(25.0)
Mechanical Operating Rate ᕅ
Maximum 3/sec 3/sec 2/sec 2/sec 1/sec
Mechanical Life
10,000,000 10,000,000 8,000,000 8,000,000 5,000,000
Humidity ᕆ
95% Non-condensing 95% Non-condensing 95% Non-condensing 95% Non-condensing 95% Non-condensing
Insulation Voltage (Ui)
690V 690V 690V 690V 690V
Impulse Withstand Voltage (Uimp)
6 kV 6 kV 6 kV 6 kV 6 kV