Prewash, Stain, Setting the delay timer – Electrolux LAVAMAT 62610 User Manual

Page 14: Starting a programme

PREWASH

Hot pre-wash before the main wash that follows automatically; with
intermediate spin for

(COTTONS/LINEN) and

(EASY-CARES),

without intermediate spin for

(DELICATES).

STAIN

For heavily soiled or stained washing. In-wash stain treatments are
washed in at the optimum time as the programme progresses. Can only
be used for washing temperatures of above 40°C as stain removers are
not effective at lower temperatures.

Setting the delay timer

Using the

button (DELAY TIMER) you can delay the start of a pro-

gramme by 30 minutes (30') to a maximum of 23 hours (23h).

1. Select the programme.
2. Press the

button (DELAY TIMER) repeatedly until the multi-display

shows the desired time delay, e. g., 12h, if the programme is to start in
12 hours. The

indicator (DELAY TIMER) will light up.

If the display is showing 23h and you press the button again, the time
delay will be cancelled. 0' will appear followed by the length of the
wash programme that has been set.

3. To activate the delay timer, press the

button (START/PAUSE). The

time remaining to the start of the programme is continuously displayed
(e. g., 12h, 11h, 10h,... 30

etc.).

Starting a programme

1. Check that the tap is turned on.
2. Press the

button (START/PAUSE). The programme is started or it

starts after the time delay set has elapsed.

If after pressing the

button (START/PAUSE) E40 flashes in the

multi-display, the

(END) indicator flashes 4x and at the same time an

acoustic signal sounds 4x, the door has not been correctly shut. Push
the door firmly closed and press the

button (START/PAUSE) again.