Element Electronics ELE E850PD - Manual (Page 24)

Setting Audio for Downmix
1. Press SETUP on the remote control.
2. Use the direction keys (
) to select Audio Setup and
its sub-menu.
3. Press to confirm your selection.
Changing Downmix
Audio Setup
4. Press SETUP to exit.
OSD Digital Out
Downmix
Lo/Ro
Lt/Rt
Changing Digital Out
Audio Setup
:Select
OSD Digital Out
Downmix
SPDIF/PCM
SPDIF/RAW
Off
:Select
Note:
SPDIF/OFF:select this when you do not want to have digital
audio signal output.
SPDIF/RAW:select this when the digital audio output is
connected to an external amplifier with Dolby
Digital or DTS decoder which gives 5.1 channel
sound.
SPDIF/PCM:select this when the external amplifier has no
decoder.
~ 22 ~