GE 35 Pint Capacity Portable Dehumidifier Owners Guide - Manual (Page 6)

6
49-5000627 Rev. 0
NOTE : This is for 22 and 35 pint models only . Before plugging in the dehumidifier, remove the casters from the
bucket and install as shown below.
Installing the Casters
1. Remove the 4 casters from the bag taped to the inside
of the water bucket lid.
2. Carefully lay the dehumidifier down on it’s front or back.
3. Following the arrows on the base, slide the 4 casters
into place.
4. Place the unit upright and wait 1 hour before use.
Installation Instructions
Dehumidifier is on it’s front
OPERA
TING INSTRUCTIONS