Electrolux D8100-1 User Manual
Page 40
REPLACING AN OVEN LIGHT BULB
The oven light illuminates the main oven when the
function is chosen, or when a main oven function and
temperature are selected.
The second oven light illuminates when the Second
oven light function is selected, or when a cooking
function and temperature are selected.
The type of bulb required is a 300°C 25 watt small
Edison Screw.
(Available through Service Force Centres).
1. Make sure the appliance is cool before replacing the
bulb.
2. Open the oven door and remove the shelves and
wirework runners.
Instructions on how to remove the wirework
runners are given on page 37.
3. Pull the glass bulb cover towards you and then pull
it off. If necessary, use a screwdriver to carefully
lever off the cover, taking care not to damage the
oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Replace the oven shelves.
7. Restore the electricity supply and reset the time of
day.
40
Disconnect the appliance from the
electricity supply before replacing the bulb.