Electrolux BIW 80 - Manual (Page 26)

26
Unpacking
All transit bolts and packing must be removed
before using the appliance
You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.
■ Unscrew and remove the three rear transit bolts
(using a spanner).
■ Lay the machine gently on its back, making sure
that the hoses are not squashed.
We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back
to avoid the hoses being squashed.
■ Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.
■ Place the machine in an upright position and
remove the three plastic bolts.
■ Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction
booklet.
AL009
2
1
P0287