Emerson CKS2000N - Manual (Page 10)

9
WAKE TO BUZZER
1. Reconfirm the wake up time and alarm mode settings for the alarm you are
using, Alarm 1, Alarm 2, or both alarms.
2. Set the Alarm selector switch for one or both alarms to the Buzzer (Buz) position.
The appropriate Alarm 1 and/or Alarm 2 indicators will light up to confirm that
the alarms are set.
3. At the selected wake up time the buzzer will sound. It will continue for one
hour and then shut off automatically.
4. To stop the buzzer sooner, press either the appropriate Alarm 1 or Alarm 2
button. The buzzer will stop but the alarm remains set and will turn the buzzer
on again at the same time on the following day (depending on the Alarm
Mode setting). To stop the buzzer and turn on the radio immediately, press the
Radio On/Off button instead of the Alarm 1 or Alarm 2 button.
5. If you do not want the alarm to turn the buzzer on the following day, set the
appropriate Alarm selector to the ‘Off’ position.
RADIO AND BUZZER OPERATION
You may also set one alarm for wake to radio and the other for wake to buzzer.
Just set the Alarm 1 and Alarm 2 selector switches to the desired positions.
SNOOZE ALARM
After the radio or buzzer alarm sounds in the morning you may press the Snooze
bar for a few more minutes sleep. The alarm will stop for approximately 9 minutes
and then turn on again. You may repeat the Snooze operation up to seven times
if desired, but after the seventh time the alarm will not turn on again.
SLEEP TO MUSIC TIMER
You can program the sleep timer to play the radio for up to 90 minutes and then
shut off automatically.
1. Press the Sleep button. The display will briefly show “10” and the radio will
begin to play. After 10 minutes the radio will shut off automatically. Each time
you press the Sleep button the sleep timer will start at 10 minutes. This is the
sleep timer default setting.