Electrolux EW 1280F - Manual (Page 12)

12
11 DELAY START button
This button makes it possible to delay the starting of
the programme by up to 24 hours. The delay you
have selected is shown on the display for about 3
seconds; afterwards, the duration of the programme
reappears.
If the button SOAK has been pressed the selected
delay will correspond to the soak time. If no delay
time is selected the soak programme will last about
30 minutes.
You must select this option after you have set the
programme and before you press the
START/PAUSE button.
The time value shown on the display will decrease
by one unit every hour.
You can change the delay time at any moment,
before you press the START/PAUSE button, then
press the DELAY START button till the desired delay
time appears in the display. At the end press the
START/PAUSE button again.
If you have already pressed the START/PAUSE
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY START button once, to erase the
delay time. The display will indicate “ 0 h’ ”.
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
12 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme will light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
Prewash
Wash
Rinses
Spin
Drain
132990380.qxd 01/04/2004 13:35 Pagina 12 (Nero/Process Black pellicola)