Enviro DV36 - Manual (Page 15)

Mount the two framing mount brackets on each side and secure the
fireplace to framing with screws or nails (refer to Figure 16). The brackets
will allow for a 1⁄2” (13 mm), 5⁄8” (16 mm), 3⁄4” (19 mm) thick finishing
wall. The wall may be finished up to the fireplace facing with combustible
material.
Figure 16. Nail Tab.
Initial Installation
QUALIFIED INSTALLERS ONLY
F
RAMING
M
OUNT
B
RACKETS
:
C
ORNER
I
NSTALLATION
:
The dimensions for installing a fireplace in the corner of a room are given in Figures 17 and 18. Refer to
“I
NITIAL
I
NSTALLATION
- V
ENT
C
ONFIGURATIONS AND
R
ESTRICTOR
S
ETTINGS
” for allowable pipe lengths.
Do not interfere with the structural integrity of the walls.
Figure 17. Dimensions for a corner installation, rear
vented.
15
Figure 18. Dimensions for a corner installation, top
vented.
R
AISED
F
IREPLACES AND
H
EARTHS
:
Figure 20. Raised Fireplace with Floor Level Hearth Figure 19. Raised Fireplace with Raised Hearth