Edimax Technology EW-7206Apg - Manual (Page 39)

Wireless LAN Access Point Configuration
DHC P Se rve r Se t t ing
DHCP Server will automatically give your LAN client an IP address. If the DHCP is
not enabled then you’ll have to manually set your LAN client’s IP address.
Parameter Description
Default Gateway IP Specify the gateway IP in your network. This IP address should be
different from the Management IP.
Domain Name Server IP This is the ISP’s DNS server IP address that they gave you; or you can
specify your own preferred DNS server IP address.
Start IP/End IP You can designate a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients. By default the IP range is from: Start
IP 192.168.2.100 to End IP 192.168.2.200.
37