Asus GeForce RTX 4070 TUF Gaming Graphics Card - Manual (Page 2)

2
English
NOTE: The illustrations in this document are for your reference only, they may not be of the same model as the one you purchased.
A. Graphics Card Installation
1. Make sure your computer is completely unplugged from the power source, then remove the chassis cover and locate an
open motherboard PCIe slot.
2. Remove chassis rear expansion slot covers according to the needs of your graphics card.
3. Insert the graphics card into the motherboard PCIe slot until a click is heard.
4. Secure the graphics card to the chassis with the required number of screws.
5. If your graphics card features auxiliary power connector(s), connect the PCIe power connectors from the power supply unit
(PSU) to the graphics card. If your graphics card features an additional power adapter cable please make sure to use the
adapter cable to connect the graphics card and the PSU.
6. Make sure to connect the display device to the graphics card.
OFF
6 pin 8 pin or 6+2 pin
PCIE power cable from PSU
12+4 pin 12+4 pin PCIe power adpater cable
OR