Screen information, Broadcasting information, Video1 – Emerson LC320EM9 B User Manual
Page 17
17
EN
WATCHING TV
INTRODUCTION
PREPARATION
INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Screen Information
You can display the currently selected channel or other information such as
the audio mode on the TV screen.
TV
In the analog mode, the current channel number and the audio mode are
displayed.
Press [INFO].
6
SAP
/ STEREO
TV-PG DLSV
480i
480i
4:3
4:3
SD
SD
CC
CC
The current channel number, audio mode, type of
resolutions for video signal, TV aspect ratio, CC and
TV program rating are displayed on the top-right
corner of the TV screen.
To clear the display, press [INFO] again. You can also
press [BACK].
5
•
DTV
In the digital mode, the detailed broadcasting information for the current
channel such as program title, program guides are displayed.
Press [INFO] to display the details of the currently
selected program.
Broadcasting Information
The following information is displayed.
1 program
title
2 broadcast
station
3 program
guide
(The program guide added to broadcasting
information is displayed. Maximum display of 4
lines.)
4 channel
number
5 audio
language
(Refer to “Switching Audio Mode” on page 16.)
6 effective scanning lines and scan mode
7 program
format
8 program aspect ratio
9 program
rating
10 CC (not available if CC is set to “Off”)
6-1
English 1/2
TV-PG DLSV
1080i
1080i
16:9
16:9
HD
HD
CC
CC
A Day of Memories
A Day of Memories
KABC
KABC
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were
1
2
4
3
9
5
6, 7, 8
10
Note:
• When the program guide consists of more than 4 lines, use
[Cursor K/ L] to scroll.
• “No description provided” is displayed when the program
guide is not provided.
• While the program guide is displayed, the closed caption
function is interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO1 input
jack.
Video1
TV-PG DLSV
480i
480i
SD
SD
CC
CC
• The information display will automatically disappear in
1 minute.
•