Setting the time and date – Ericsson BS260 User Manual
Page 23
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
22
Getting started
The base station contains a built-in clock for the time and date. The handset
shows this time and date on the standby display when the time and date have
been set.
Please note that the procedure assumes that you are going to select the
Basic
option. After you have entered your PIN code, you have to go to the
SetTime
option via the
Time&Date
menu.
To set the time:
Route:
BaseStation » Settings » Basic » Time&Date » SetTime
1.
Select
Basic
and press
Y E S
.
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 78) and press
Y E S
.
3.
Select
SetTime
and press
Y E S
.
The current time is displayed in hours, minutes and seconds.
4.
Enter the time (
U P
= move left;
D O W N
= move right).
5.
Press
Y E S
to confirm.
The base station time has now been set.
Other handsets connected to the base station automatically show the new time.
To set the date:
Route:
BaseStation » Settings » Basic » Time&Date » SetDate
1.
Select
Basic
and press
Y E S
.
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 78) and press
Y E S
.
3.
Select
SetDate
and press
Y E S
.
The current date is displayed in years, months and days.
4.
Enter the date (
U P
= move left;
D OW N
= move right).
5.
Press
Y E S
to confirm.
The base station date has now been set.
Other handsets connected to the base station automatically show the new date.
SETTING THE TIME AND DATE
Time:
02:12:45
Date:
1998-06-01