Echo SB - Manual (Page 43)

43
PAS PRO-THATCH ATTACHMENT
Misuse, improper assembly, or use of unapproved
attachments, can result in serious injury, engine failure,
and voiding of warranty. Use only Echo attachments
approved for use on Pro Attachment Series models.
Contact with moving work attachments can cause
entanglement and serious injury. Keep clear of moving
work attachment.
•
ALWAYS check Pro-Thatch tines for damage and
secure attachment before using unit. Replace tines
if damaged or missing.
•
NEVER use ProThatch without dethatcher guard in
place. Operation without a guard exposes operator
to flying debris and rotating steel tines.
•
ALWAYS install J-Handle before using unit, and
adjust position as needed to accommodate opera-
tor. J-Handle provides best control and comfort
when operating unit.
•
NEVER replace tines with engine running. Stop
engine and disconnect spark plug lead. Wear work
gloves when replacing or handling tines.
PAS POWER EDGER ATTACHMENT
Misuse, improper assembly, or use of unapproved
attachments, can result in serious injury, engine failure,
and voiding of warranty. Use only Echo attachments
approved for use on Pro Attachment Series models.
Contact with moving cutting or work attachments can
cause entanglement and serious injury. Keep clear of
moving work attachment.
•
ALWAYS check edging area for hidden objects,
and remove all dangerous debris.
•
ALWAYS stay clear of spinning edger blade.
•
NEVER operate with unit on left side of operator.
Use only on right side of body to keep operator out
of edger debris path.
•
NEVER use edger in gravel, rocky soil, or in land-
scape beds with decorative rock ground cover.
•
ALWAYS use only Echo-approved edger blades.
•
NEVER use edger blades on any trimmer or brush
cutter.
OPERATION
Position Edger on right side of
operator only
Pro-Thatch Attachment