Eureka 6997 - Manual (Page 7)

9
9
9
7
How to Assemble and Use
(continued)
5. Insert hose coupling into front of canister. 6. Pull cord out until fully extended, and push plug
into outlet. To rewind, step on Cordaway cord reel
button, hold and guide plug while it rewinds.
7. Step on motorized nozzle to release handle;
pull back to comfortable work position.
8. Push On/Off canister switch.
(A thermostat automatically shuts off the motor if
it overheats, see Thermal Cut Off.)
9
k
9. Bare floor or carpet cleaning selection on
remote control, only.
Motorized
Nozzle
On/Off Canister Switch 7
9 5
6
8
10
10. Red light indicates dirt, dust, etc. is still being
removed from the area being cleaned. The green
light indicates the area is clean and to move on to
the next area.
NOTE: Dirt sensor works most effectively when suction
control regulator on canister and vacuum
control on handle are both on HIGH.
HINT: New carpeting has loose carpet fibers which
will activate the red light sensor beam.
Red
Light Green
Light
Only with Model 6999
9 V
k
Must install
9V Battery