Electrolux 50 CR User Manual

Page 20

You can wash the removable parts in very hot soapy water. You may
use mild abrasives. Make sure that the electrode and the hole and slots
in the crown are not blocked with food or cleaning materials.

Clean the burner crowns by soaking them in very hot soapy water.

You can remove any stubborn stains by scouring with a soap filled pad
such as 'Brillo'. If you look after the burner crowns in this way they will
stay reasonably clean. However the surface will dull with time.

Aluminium based saucepans can leave shiny metal marks on the

pan supports. To clean the pan supports regularly remove the marks
using a mild abrasive like 'Jif' with a soft scourer. For more stubborn
marks you can use a soap filled pad such as 'Brillo'.

After cleaning the cooker parts, dry them

thoroughly before you put them back.

When replacing hotplate burner parts

1. Crown to body (Do not try to force the crown on to the body). Make

sure that the hole in the crown is centrally over the electrode.
Check that the two longer location pegs
sit in the slots in the body. When the
crown is in the position let it fall freely on
to the body.
Check that the crown can be moved
slightly from side to side.

2. Cap to crown

Place cap centrally on the top of crown
(enamel side up). Move sideways and
front to back to check the cap is fitted
properly.

3. Check for ignition

If a burner will not light then you need to
check the crown and cap positions.

The grill

Clean the area around the grill frequently using hot soapy water.

After use you can soak the pan for a few minutes and then clean it

using mild abrasives or a soap filled pad such as 'Brillo'.

Clean the grill shelf using hot soapy water. Mild abrasives can be

used if necessary. If the grill shelf is removed it must be replaced the
right way up.

L Y R I C 5 0 C R