Electrolux LAVAMAT 50600 - Manual (Page 12)

Description of the appliance
12
Soaking duration approx. 20 minutes, maximum 40 °C (approx.
15 minutes when EASY-CARES button is additionally pressed).
Afterwards the washing remains in the water until the water has been
pumped out.
PUMP OUT
Pumping out of water after RINSE HOLD (without spin) or after
separate soaking.
Program selector as progress indicator
The program selector serves as a progress indicator by moving clockwise
until the end of the program is reached.
Temperature selector
You can set the following temperature steps via
temperature selector:
Cold, 30, 40, 50, 60, E, 70, 80, 95
2 Position E (energy-saving program) is suitable for
boiled washing of light to normal soiling; reduced
temperature to approx. 67°C.
EASY-CARES button
For easy-care washing. This button is active when
using the program selector, a program is selected
from the group of COTTONS/LINEN, EASY-CARES
(+button) or by separate SOAKING.
SOAKING button
This button is active when PRE WASH/SOAKING
is selected.
Final spin speed button
With this button you reduce the spin speed
for the final spin process.
RINSE HOLD button
If RINSE HOLD is selected the washing remains
in the last rinsing water, it will not be spun.
Indication lamp ON
The indication lamp ON illuminates, as soon as the
washing machine is switched on.