Operation, Pairing a bluetooth device, Connecting two speakers – ION Audio Pro Glow 1500 Complete High-Powered 500W Bluetooth Speaker System User Manual
Page 8
8
Operation
Pairing a Bluetooth Device
1.
Turn on your Bluetooth device.
2.
Power on Pro Glow 1500.
3.
Use the
Mode
button to select Bluetooth mode, which appears as "
bt
" in the display. Pro Glow
1500 will automatically go into pairing mode to search for Bluetooth devices. You will know you
are in pairing mode when the Bluetooth icon is flashing.
4.
Navigate to your Bluetooth device’s setup screen, find
Pro Glow 1500
, and connect. The
Bluetooth icon
will remain solidly lit.
Note:
Users should consider updating their device’s OS if experiencing trouble with pairing or
playing music.
5.
To disconnect pairing, turn off Bluetooth on your device or select
Forget this device
from your
device.
Note:
Press and hold the
Play/Pause
button
for 6 seconds (the display will show U-OFF) to disable
the Bluetooth pairing voice prompts. Press and hold the
Play/Pause
button again for 6 seconds (the
display will show U-ON) to enable voice prompts.
Connecting Two Speakers
To link two Pro Glow 1500 speakers:
1.
Plug a XLR cable into the
Mix Output
located on the rear panel of one Pro Glow 1500.
2.
Plug the other end of the XLR cable into the
XLR
input
of another Pro Glow 1500.
3.
Power on both speakers. Use the
Aux Input Volume
on the second speaker to adjust the input
signal level.