RCF COMPACT M 08 Passive 2-Way Speaker (White) - Manual (Page 8)

8
EN
4. HORIZONTAL MOUNTING WITH U BRACKET
Necessary optional accessory:
- HORIZONTAL BRACKET H-BR 2X COMPACT M 08 (for COMPACT M 08 model);
- HORIZONTAL BRACKET H-BR 2X COMPACT M 10 (for COMPACT M 10 model);
- HORIZONTAL BRACKET H-BR 2X COMPACT M 12 (for COMPACT M 12 model);
1� Fix the U bracket to the wall / ceiling through at least 4 lateral wall plugs (max� M8) plus a central one (max� M10)�
2� Mount the U bracket to the loudspeaker by tightening the two M10x35 bolts into the holes of the loudspeaker top and bottom, as shown in
the figure below�
Alternatively, it’s possible to install the speaker in a less protruding way by using the other two inner holes on the U bracket�
Before tightening the two M10 bolts, adjust the loudspeaker vertical tilt and then (when you found the right angle) fix it through two M4�2x22
self-threading screws (passing through the small hole of the U bracket) directly into the loudspeaker cabinet wood�
NOTE: instead of simple M10 bolts, it is possible to use the M10 bolt included knobs.
CAUTION: do not tilt the loudspeaker upwards.
Model COMPACT M 04 comes with its own HORIZONTAL BRACKET wich must be fixed in the same way as the other COMPACT M models (see
picture below)�