Electrolux 24 - Manual (Page 5)

5 Installation
Installing the Wine Cooler / Beverage Center
Your Electrolux wine cooler / beverage center has been designed for either free-standing or built-in
installation. When built-in, your wine cooler does not require additional air space for top, sides or rear. In
either case, the front grille must NOT be obstructed.
NOTE
To ease unit installation and removal, it is recommended that the cabinet rough opening dimensions be
increased by at least
¼
inch over the dimensions given for your unit.
Width Height Depth
23 13 /
16
inch 34-35 inches 26 3 /
4
inch
Unit Dimensions
NOTE
All units require zero clearance when installed flush with a cabinet or wall. Electrolux stainless steel
models require a minimum 2
⁷⁄₈ inch handle clearance when installed against a wall or cabinet that
extends beyond the front edge of the unit.
Product Dimensions