Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Operator's guide
Table of contents
Document Outline
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- 1.1 Main Features
- 1.2 Parts and Functions
- 1.3 Turning the Power ON/OFF
- 1.4 Opening/Closing the ADF
- 1.5 Opening/Closing the Document Cover (fi-7260/fi-7280)
- 1.6 Setting Up the ADF Paper Chute (Feeder)
- 1.7 Setting Up the Stacker
- 1.8 Power Saving Mode
- 1.9 Basic Flow of Scanning Operation
- 1.10 Image Scanning Application
- 1.11 Centralized Management of Scanners
- Chapter 2 How to Load Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 How to Use the Operator Panel
- Chapter 5 Various Ways to Scan
- Chapter 6 Daily Care
- Chapter 7 Replacing the Consumables
- Chapter 8 Troubleshooting
- 8.1 Paper Jam
- 8.2 Error Indications on Operator Panel
- 8.3 Troubleshooting
- Scanner cannot be powered ON.
- The LCD and the [Power] button light switch OFF.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- An error (error code "U0:10", "U4:40" or "U5:4A") is already displayed in the LCD after power-on.
- Multifeed error occurs frequently.
- Situation in which the document is not fed into the ADF occurs frequently.
- Paper protection is set off frequently.
- Paper jams/pick errors occur frequently.
- Scanned images turn out elongated.
- A shadow appears at the top or the bottom of the scanned image.
- There are black traces on the document.
- The Carrier Sheet is not fed smoothly. / Paper jams occur.
- Part of the image appears missing when using the Carrier Sheet.
- 8.4 Before You Contact the Scanner Service Provider
- 8.5 Checking the Product Labels
- Chapter 9 Operational Settings
- 9.1 Starting Up the Software Operation Panel
- 9.2 Password Setting
- 9.3 Configuration Items
- 9.4 Settings Related to Sheet Counters
- 9.5 Settings Related to Scanning
- Adjusting the Position to Start the Scan [Offset/Vertical magnification Adjustment]
- Removing Shadows/Streaks that Appear around the Scanned Image [Page Edge Filler (ADF)]/[Page Edge Filler (FB)] (fi-7260/fi-7280)
- Removing a Color from the Scanned Image [Dropout color]
- Shortening the Scanning Intervals [Pre-Pick]
- Number of Paper Feeding Retries
- Document Feed Speed [Pick Speed]
- Cropping the Image Boundary [AutoCrop Boundary]
- Protecting the Documents from Being Damaged [Paper Protection]
- Specifying the Sensitivity Level for Paper Protection [Paper Protection Sensitivity]
- Scanning Thick Plastic Cards [Feed Mode] (fi-7180/fi-7280)
- Scanning at High Altitude [High Altitude Mode]
- 9.6 Settings Related to Multifeed Detection
- 9.7 Settings Related to Waiting Time
- 9.8 Settings Related to Power ON/OFF
- 9.9 Settings Related to Scanner Maintenance
- Appendix
- Glossary
- Index