Electrolux 61016VI User Manual
Page 14
14
Setting the heat setting
1. Select the heat setting.
2. To end the cooking process, turn back
to the Off position.
3
The corresponding ring pilot light is
lit while the ring is operating.
Switching on the dual fry/cook area
1
The control for the dual fry/cook area is switched on by turning to the
right, and cannot be turned past the stop!
1. Turn the dual fry/cook control to the
right. Continue turning to Position 9,
and onto the
symbol (you will feel
a slight resistance). The stop position
will then be clearly detectable.
2. Finally, turn back to the desired set-
ting.
3. After cooking, turn back to the OFF position.
3
To use the dual fry/cook area again afterwards, the larger ring must be
switched back on.
Residual heat indicator
The residual heat indicator lights up, as soon as the corresponding
cooking zone is hot.
1
Danger! Risk of burns from residual heat. After being switched off, the
cooking zones need some time to cool down. Look at the residual heat
indicator.
2
Residual heat can be used for melting and keeping food warm.