Hahnel Captur Timer Module - Manual (Page 7)

Captur Module - Timer 5
Captur Module - Timer
1 Sound ON/OFF
2 Button Lock
3 Delay before shooting starts
4 Duration of burst/exposure with
continuous/bulb
5 1st Interval time
6 Number of shots at 1st Interval
Number of times
program is repeated
7 2nd Interval time
8 Low battery indicator
9 Hours
10 Minutes
11 Seconds
12 Shot count 0 to 999, --- (unlimited)
13 Shutter release LED
14
SET button
15
Toggle Button
Setting up Captur Module - Timer
The Captur Module - Timer is used as an accessory with the
Captur (sold separately) to control the camera wirelessly.
The Captur and the Captur Module - Timer must be channel
matched using DCM. Alternatively you can also connect
the Captur Module - Timer directly to a DSLR camera with a
camera cable (sold separately).
Digital Channel Matching – DCM
(Requires Captur Transmitter)
a. Transmitter - Press and hold button + Turn ‘ON’. LED will
flash green rapidly
b. Timer - Press and hold SET button 14 + Turn ‘ON’. LED will
show steady red
c. Receiver - Press and hold button + Turn ‘ON’. LED will show
GB