ELSA Cable User Manual
Page 92
Description of the menu options
ELSA MicroLink Cable
R84
Protocol-
table
The protocol table also supplies valuable information on the volume of packets
transferred to the LAN or cable network. These values are broken down according to the
various IP protocols, such as ICMP, TCP, UDP.
A protocol table might have the following appearance:
Status/IP-router-statistics/RIP-statistics
This option allows you to display the IP-RIP packets received by the device. These
substatistics provide you with the following entries:
The associated IP-RIP table contains all of the routes learned from the network. The
router itself maintains this table; you cannot modify it manually.
An IP-RIP table might have the following appearance:
Protocol
LAN-tx
Cable-tx
tcp
14
30
udp
15
50
icmp
60
40
RIP-rx
Number of IP-RIP packets received
RIP-request
Number of IP-RIP request packets received
RIP-response
Number of IP-RIP response packets received
RIP-discards
Number of IP-RIP packets discarded
RIP-errors
Number of damaged IP-RIP packets
RIP-entry-errors
Number of erred entries in IP-RIP packets
RIP-tx
Number of IP-RIP packets sent
Table-IP-RIP
Routing table of routes learned through RIP broadcast
Delete-values
Deletes RIP statistics
IP-address
IP-netmask
Time
Distance
Router
223.245.254.0
255.255.255.0
1
1
192.38.9.100
223.245.257.0
255.255.255.0
1
1
192.38.9.200