Blackmagic Design SmartView 4K 2 15.6" DCI 4K Broadcast Monitor (6 RU) - Manual (Page 340)

340 Informazioni per gli sviluppatori (English)
Displaying SD in 16:9
The set Video Monitor mode to display standard definition video in 16:9:
MONITOR A: ↵
ScopeMode: Picture ↵
WidescreenSD: ON ↵
Displaying SD in 4:3
To set Video Monitor mode to display standard definition video in 4:3:
MONITOR A: ↵
ScopeMode: Picture ↵
WidescreenSD: OFF ↵
When setting one of SmartScope Duo 4K’s monitors to audio metering, you can also select
which channels to show. The values for selecting which audio channels are mapped in the
following way:
0: Channels 1 and 2
1: Channels 3 and 4
2: Channels 5 and 6
3: Channels 7 and 8
4: Channels 9 and 10
5: Channels 11 and 12
6: Channels 13 and 14
7: Channels 15 and 16
MONITOR B: ↵
ScopeMode: AudioDbvu ↵
AudioChannel: 0 ↵
↵
In the example above, Monitor B has been selected to display Audio Metering in Dbvu with
audio channels 1 and 2 selected for the phase meter.
Selecting LUTs for SmartView 4K
To select 3D LUTs using SmartView 4K:
MONITOR A: ↵
LUT: 0 LUT 1
1 LUT 2
NONE DISABLE
↵
↵