Emerson Radio iP100 User Manual

Page 10

OPERATING INSTRUCTIONS (CONTINUED)

NOTE: To prevent any interference between your iPod and the radio in this unit,

your iPod should be switched 'Off' when listening to the radio.

ISTENING TO THE RADIO

Set the POWER button to the

‘On’ position, the display

lighting turns on.

Set the FUNCTION button to

the Radio position. The display

will change from time to radio

frequency. Set the BAND

selector to the desired band,

AM or FM Auto.

Rotate the TUNING control

until the display shows the

desired AM or FM station

frequency. Turn the TUNING

control clockwise to select

higher numbered frequencies

or counter-clockwise to select

lower numbered frequencies.

The FM STEREO indicator will

light when you tune to an FM

Stereo station.

Rotate the VOLUME control to

increase or decrease the

volume level. If you want to

increase the bass response

set the DBBS button to the

‘On’ positon.

Note: If you are listening to

music that contains heavy

bass at high volume levels the

sound may become distorted

if the DBBS switch is set to the

‘On’ position. If this occurs

set the DBBS switch to the

‘Off’ position, or reduce

the volume level.

When you are finished listening

set the POWER button to the

‘Off’ position. The display

changes from radio frequency

to correct time and the display

lighting goes off.