Eureka 4670 Series - Manual (Page 16)

16
Use 15 watt replacement light bulb, part
number 48815.
How To Change Light Bulb
(Only for models with
a headlight)
NOTE: Turn off the power switch and disconnect the
electrical cord before changing light bulb.
1. Lower handle. Remove two screws from lens cover.
2. Pull lens cover from cleaner.
3. Pull light bulb and socket toward front.
4. Push light bulb into socket; turn to release.
5. Place new light bulb into socket; turn to secure.
6. Push light bulb and socket back so bulb will not touch
lens cover.
7. Replace lens cover.
8. Secure with two screws.
3
5
4
1
HOW TO MAINTAIN
(continued)
Exhaust
Filter
Door
Micron and HEPA Exhaust Filters
(Only
for models with the exhaust filter door)
Change micron or HEPA exhaust filter every 3
months.
To Replace Micron or HEPA Exhaust
Filter
1. Lower the handle. Open exhaust filter door; push
toward the left side.
2. Grasp filter and pull out.
3. Push new filter into cleaner, smooth side facing out .
4. Close exhaust filter door; push toward right side.
Replace all filters with genuine Eureka replacement
filters.
2
3
. . . . . . . . . .
Micron or
HEPA
Filter
Exhaust Filter
Door
. . . . .
. . . . .