02 installing the velox dash mount – iOttie Velox Magnetic Wireless Charging Dash and Windshield Mount User Manual
Page 5

9
8 EN
Attaching the Dash Mount
Choose an installation method: dashboard/flat
surface (A) or windshield (B).
Option A
Dashboard or Flat Surface Installation
Choose a flat area on the vehicle’s dashboard
and wipe any dust or debris from the surface.
1. Peel off the film on
the dashboard pad &
attach to the desired
installation location.
2. Peel off the protective
film on the suction cup
and press firmly onto
the dashboard pad.
3. Push down the locking
lever to engage
suction.
•
The dashboard pad is mounted with a
semi-permanent adhesive tape. Once
removed, it cannot be re-mounted.
•
When mounting, it is recommended that
the surface and product be above 40°F.
•
When removing the dashboard pad,
please use caution. We recommend
removing slowly from the edge to avoid
damage.
02 Installing the Velox
Dash Mount
*If your vehicle has a leather dashboard we recommend
windshield mounting to avoid damaging your dash.