How to assemble, For wet pick-up only, For dry pick-up only – Eureka 2800 Series User Manual

Page 8

4. Place lid over tank so power

switch is toward front above
hose inlet.

Hose
Inlet

Power Switch

1. Squeeze latches together; lift

to remove lid.

HOW TO ASSEMBLE

CAUTION:

Fully assemble the cleaner before using.

2. With tank placed upside

down, push swivel caster
into each socket. Be sure it
snaps into place.

Latch

3. Install filters for type of cleaning.

NOTE: Filters install the same for both wet/dry unit (as pictured) or wet/dry

with detachable blower.

a. Pull foam filter over

ball float cage.

b. Slide disposable

paper filter bag over
foam filter.

c. Place rubber band

around top of paper
filter bag.

Ball
Float
Cage

FOR WET PICK-UP ONLY:

NOTE: Do not use disposable paper

filter bag for wet pick-up.

FOR DRY PICK-UP ONLY:

a. Pull foam filter over

ball float cage.

b. Place rubber band

around bottom of
foam filter.

Ball
Float
Cage