Blizzard RokBox 5 RGBAW Color Wash LED Fixture - Manual (Page 16)

Page 16
RokBox 5 RGBAW Manual Rev. B © 2020 Blizzard Lighting, LLC
DMX Values In-Depth (5-Channel Mode)
Ch. Value What It Does
1 000 <--> 255 Red Intensity (0% <--> 100%)
2 000 <--> 255 Green Intensity (0% <--> 100%)
3 000 <--> 255 Blue Intensity (0% <--> 100%)
4 000 <--> 255 Amber Intensity (0% <--> 100%)
5 000 <--> 255 White Intensity (0% <--> 100%)
DMX Values In-Depth (4-Channel HSV Mode)
Ch. Value What It Does
1 000 <--> 255 RGB Color Mixing
2 000 <--> 255 Amber Intensity (0% <--> 100%)
3 000 <--> 255 White Intensity (0% <--> 100%)
4 000 <--> 255 Dimmer (0% <--> 100%)
Troubleshooting
Symptom Solution
Fixture Auto-Shut Off Check the fan in the fixture. If it is stopped or moving slower than
normal, the unit may have shut itself off due to high heat. This is
to protect the fixture from overheating. Clear the fan of obstruc -
tions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also ensure
that the 220V/110V switch is in the correct position, if applicable.
No Light Output Check to ensure fixture is operating under correct mode, IE sound
active/auto/DMX/Etc., if applicable.
Chase Speed Too Fast/
Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that moving parts are
not restricted and that unit’s ventilation is not obstructed
No Response to Audio Verify that the fixture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not Responding /
Responding Erratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).