beautypg.com

Positioning racks and bakeware, Oven vent, Baking and roasting – Estate TEP315VQ User Manual

Page 5: Broiling

background image

5

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.

Racks

Position racks before turning on the oven.

Do not move racks with bakeware on them.

Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge,
and then lift out. Use the following illustration and charts as a
guide.

Rack Positions

Rack 5: Toasting bread or broiling thin, non-fatty foods.
Rack 4: Use for 2-rack baking and broiling.
Rack 3: Most baked goods on a cookie sheet or jelly roll pan, layer

cakes, frozen convenience foods. Broiling chicken pieces.

Rack 2: Roasting small cuts of meat, pies, casseroles, bundt

cakes, and 2-rack baking.

Rack 1: Roasting large cuts of meat and poultry.
Multiple Rack Cooking

2-rack: Use rack positions 2 and 4.
Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks use racks 2 and 4
for baking. Place the cakes on the racks as shown.

Oven Vent

The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering vent will
cause poor air circulation, affecting cooking and cleaning results.
Do not set plastics, paper or other items that could melt or burn
near the oven vent.
The element can be used when the oven is in use as long as the
cookware does not extend more than

¹⁄₂" (1.3 cm) over the element.

Baking and Roasting

Before baking and roasting, position the racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is not
necessary to wait for the oven to preheat before putting food in,
unless recommended in the recipe.

To Bake or Roast:

1. Push in and turn the oven control knob to the desired

temperature setting. The OVEN HEATING light will turn on and
remain on until the oven reaches the set temperature.

2. Place food in oven. The bake element will turn on and off to

maintain cooking temperature. The OVEN HEATING light will
turn on and off with the element.

3. Turn oven control knob to OFF when finished.

Broiling

Broiling uses direct radiant heat to cook food. Changing the
temperature when Custom Broiling allows more precise control
when cooking. The lower the temperature, the slower the cooking.
Thicker cuts and unevenly shaped pieces of meat, fish and poultry
may cook better at lower broiling temperatures.

For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be ordered.
Please refer to the cover for contact information. Ask for Part
Number 4396923.

It is not necessary to preheat the oven before putting food in unless
recommended in the recipe. Position food on grid in a broiler pan,
then place it in the center of the oven rack. Close the door to the
broil stop position to ensure proper broiling temperature.

To Broil:

1. Push in and turn oven control knob to BROIL HI or turn to

BROIL LO to broil at a lower temperature.

2. After broiling, turn the oven control knob to OFF.

1

2

3

4

5

A. Oven vent

A