Emerson Radio MS7609 User Manual

Page 12

1 1

OPERATION

1.) Press the POWER

button on the main unit or the remote control. The main

display lighting comes ‘On’ and the STANDBY LED indicator goes ‘Off’.

2.) Select the Radio function by switching the CD/RADIO selector to RADIO

position.

3.) Select the desired band (AM, FM or FM ST.) with the Band selector switch.

4.) Rotate the TUNING control until the exact

frequency of the desired station appears on

the display. If you have tuned to an FM

Stereo station and the Band selector is set to

FM ST, the stereo indicator will appear in the

display.

Note: If you are listening to a weak or distant FM Stereo station and

reception fades or is noisy, setting the Band selector to the FM position

will normally provide some improvement. However the sound will no

longer be in stereo.

5.) Adjust VOLUME level and BASS BOOST control as desired.

6.) When you are finished listening press the POWER

button on the main unit

or the remote control to turn the power 'Off'. The main display lighting goes 'Off'

and the STANDBY LED indicator comes 'On' again.

MS7609_ib040303.p65

4/4/2003, 12:13