Electrolux EW 1209 I - Manual (Page 7)

7
8 Quick wash button
By pressing this button the washing time is reduced as
follows:
• 62 minutes for cotton 95°C
• 73 minutes for cotton 60°C
• 68 minutes for cotton 40°C and 30°C
• 42 minutes for synthetics
• 9 minutes for delicates
This option is not available with the wool programme
and the Energy saving programme “E”.
To be used for lightly soiled laundry.
9 Super Rinse button
Can be used with all programmes except the wool
programme. The machine performs 4 rinses instead of
3.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
10 Drying Time button
If you wish to carry out a timed programme push the
button until the drying time you want appears in the
display according to the fabrics (cotton or synthetics)
you have to dry.
For COTTON you can select a drying time from 10
minutes to 130 minutes.
For SYNTHETICS you can select a time from 10
minutes to 100 minutes.
11 Delay Start Button
T he wash programme can be delayed from 1 hour up to
a maximum of 24 hours by means of this button.
Selecting the delayed start
• Switch the machine on by depressing the ON/OFF
button .
• Select the programme and the required options.
• Select the delay start by pressing the button once for
each hour of the delay.
• Depress START/PAUSE button : the machine
starts its hourly countdown.
The programme will start after the selected delay has
expired.
Altering the delayed start
• Depress START/PAUSE button .
• Depress DELAY START button until the required
time is displayed.
If you wish to cancel the delay, depress the button
only once: the symbol
0 h is displayed.
• Depress START/PAUSE button again. The selected
programme will start straight away.
12 Display
T he display shows the following information:
Cancelling - Duration of the programme - Drying
time - Delayed start - Incorrect option selection -
Alarm code.
Cancelling
If a programme has been cancelled - programme
selector dial on position
X - three flashing dashes appear
on the display.
Now you can select a new programme.
Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is
updated every minute.
When the programme has finished a flashing zero is
displayed.
If you have selected the Rinse hold option
, the zero
will not flash.
Drying time
The selected drying time is displayed in minutes or
hours and minutes.
1.25
2.05
---
132993670.qxd 1/13/03 3:23 PM Pagina 7 (Nero/Process Black pellicola)