beautypg.com

How to check and clear hose blockages, How to check and clear blockages in base, Hepa cartridge filters – Eureka 4440-4470 Series User Manual

Page 9: Hepa/micron filters in filter frame

background image

Filter Frame plus

filter (depending

on your vacuum

model)

9

How to Check and Clear Hose

Blockages

(Continued)

2. Remove handle.
3. Disconnect hose.

1. Remove the attachment hose from

the lower hose retainer and look into

the hose retainer for any obstructions.

Proceed to Step 2 to check for any other

blockages.

4. Check for blockages in the brush roll

area and remove any obstructions

found there. The base hose can be

cleared of any blockage by using a

blunt instrument.

How to Check and Clear Blockages in Base

2. Remove the hood by loosening the

two screws located on the top of

the hood and lifting upward.

3. Step on the handle release

and lower the handle all

the way to the floor.

4. Reinstall the hose

and handle.

5. After the blockage is removed, replace the hood and tighten

the two hood screws (see Fig. 2). Raise the handle to the

upright position (see Fig. 3) and replace the hose into the

lower hose retainer.

To remove HEPA cartridge filters

1. Push down latch and pull filter cassette back.
2. Then lift filter up and remove.

To replace HEPA cartridge filters

1. Place bottom tabs of filter cassette into slots.
2. Rotate filter toward cleaner.
3. Push upward on the latch to secure into

place.

NOTE: To have the benefit of a sealed

HEPA system, you must use

one of the HEPA cartridge filter

systems.

To remove HEPA/Micron filters from filter frame.

1. Push down latch and pull filter frame back.

2. Then lift filter up and out of filter frame.

To replace HEPA/Micron filters into filter frame.

1. Place new filter in filter frame. Place bottom tabs of filter frame

into slots.

2. Rotate filter frame toward cleaner.

3. Push upward on the latch to secure into place.

HEPA Cartridge Filters

(Only for models with HEPA cartridge.)

Check the HEPA filters with each disposable dust bag

change. Replace twice a year or after every six bag

changes.

HEPA/Micron Filters in Filter Frame

(Only for

models with HEPA/Micron filter frame)

Latch

Tabs

Filter Cartridge

(One complete

unit)

Filter Filter

Frame

Check the HEPA/Micron

filter with each disposable

dust bag change. Replace

twice a year or after every

six bag changes.

2

3

4

This manual is related to the following products: