beautypg.com

Caution, Grounding and polarization, Cleaning – Excalibur electronic RD501-24 User Manual

Page 7: Power lines, Ac/dc adapter

background image

Real humid conditions may cause condensation build up

inside the unit causing the malfunction. If this occurs,

allow the unit to stand and dry out for several hours

before using again.

When plugging into outlet, make sure to match the wider

prong of the plug, to the wider entrance of the electric

socket, making sure plug is fully in socket.

When disconnecting, grip plug to remove.

DO NOT pull the cord.

Do not position your Jeff Gordon Radio/CD Helmet near

heat sources such as radiators, heat registers, stoves, or any

other appliance (including amplifiers) that produces heat.

If you are not using your Jeff Gordon Radio/CD Helmet for

an extended length of time, disconnect plug from socket.

What to do with a damaged

Jeff Gordon Radio/CD Helmet.

The Jeff Gordon Radio/CD Helmet should be serviced by qualified

service personnel when:

• The power-supply cord or plug has been damaged.
• Objects have fallen into, or liquid has been spilled into the

appliance enclosure.

• The

CD

player has been exposed to rain.

• The

CD

player has been dropped, or the enclosure damaged.

• The

CD

player does not appear to operate normally or exhibits

a marked change in performance.

Caution

To reduce the risk of electric shock, do not remove cover

or bottom of your helmet radio. Refer servicing to qualified

service personnel.

Grounding and Polarization

Precautions should be taken to ensure that the grounding or polar-

ization of the Jeff Gordon Radio/CD Helmet is effective.

Cleaning

The appliance should be cleaned only as recommended by the

manufacturer.

Power Lines

An outdoor antenna should be located away from power lines.

AC/DC Adapter

The Radio/CD Helmet is equipped with an

AC

/

DC

adapter. This

adapter converts the input from the

AC

current to

DC

current.

Under no circumstances should the Jeff Gordon Radio/CD Helmet

be connected to a socket on the wall without first passing through the

supplied adapter. If for any reason the adapter supplied ceases to

operate, you should contact a qualified service agency.

12

13