Jocfs1: safe boot jumper, Bat1: cmos battery, Jocfs1: safe boot jumper bat1: cmos battery – MSI MPG B650I EDGE WIFI AM5 Mini-ITX Motherboard User Manual

Page 40: Replacing cmos battery

Normal

(default)

Boot with the saved

BIOS settings.

Enabled

Apply the BIOS default

settings and lower PCIe

(from CPU) mode for

Safe Boot.

JOCFS1: Safe Boot Jumper

This jumper is used for Safe Boot. Once enabled, the system will boot with default

settings and lower PCIe (from CPU) mode.

BAT1: CMOS Battery

If the CMOS battery is out of charge, the time in the BIOS will be reset and the data of

system configuration will be lost. In this case, you need to replace the CMOS battery.

Replacing CMOS battery

Unplug the battery wire from the BAT1 connector and

remove the battery.

Connect the new CR2032 battery with wire to the

BAT1 connector.

WARNING

KEEP OUT OF REACH OF CHILDREN

∙

Swallowing can lead to chemical burns, perforation of soft tissue, can death.

∙

Severe burns can occur within 2 hours of ingestion.

∙

If you think batteries might have been swallowed or placed inside any part of

the body, seek immediate medical attention.