Empire Comfort Systems M2 - Manual (Page 7)

English
Sound from only one speaker.
Please ensure all speaker cable connections are correct. Please try an alternate sound source such as
a CD player, MP3 or other player. If both speakers now work correctly, the original sound source is at
fault. Please ensure the computer Soundcard is installed correctly.
No sound from any of the speakers
1. Please ensure AC adapter is plugged in and power outlet is switched on.
2. Please ensure Active speaker power is switched on.
3. Please ensure all audio cable connections are correct.
4. Please ensure sound source equipment is working correctly.
Speaker has distortion when volume set on Max whilst using computer USB as a power supply.
This tends to occur due to the fact the USB output cannot supply sufficient power for the speaker
system. Please adjust your volume to the correct level accordingly.
Troubleshooting Guide
Speakers exhibit excessive noise
Empire speakers are of a very low noise circuit design. Some source equipment may have a poor signal
to noise ratio. Therefore, please unplug the input audio cable, and check if the noise is from the CD/DVD
player or the Computer Soundcard etc.
Magnetically Shielded Speakers
Empire system subwoofers and satellite speakers are all of a magnetically shielded design. You can place
the speakers near a TV or monitor. However, it is wise to allow a 0.2-1 m distance between the speakers
and monitor to avoid possible magnetic field interference.
To optimize the sound quality from your system:
Sit in a comfortable position at the computer desktop. Take time to test the listening environment by
using music CDs with wide frequency content and spacious left-to-right imaging. The speaker driver
used in the loudspeakers will change their characteristics subtly over the first two weeks of use as the
suspension of the cones will loosen up slightly, producing a trace more warmth to the overall sound
texture. Adjust the speaker placement for the most realistic imaging and tonal balance by listening to
several different musical selections and game or computer sound effects.
For optimum acoustic performance, we recommend that you place your speakers at least 6-8” from
rear walls to reduce unwanted reflections that can muddy your sound. Bass frequencies may be
enhanced or exaggerated by placing your speakers close to a wall or corner. Please feel free to
experiment with the system's location to obtain the most pleasing effects.
Empire couples incredible technology with an amplified loudspeaker system to generate smooth deep
bass, crystal clear highs, and enough power to ensure that your personal listening experience allows
you to hear what you have been missing!
Italy
Schema dei collegamenti
e descrizione delle funzioni
1. Speaker attivo.
2. Up (tasto aumento volume).
Premi questo tasto per aumentare il volume.
3. Down (tasto diminuzione volume).
Premi questo tasto per diminuire il volume.
4. Connettore speaker attivo e non attivo.
5. Power (accensione/stand by).
Premi questo tasto giù per accendere gli speaker.
Premi questo tasto su per mettere gli speaker in
stand by.
6. Input (ingresso segnale audio).
Collegamento all'uscita della scheda sonora del
computer o ad altra fonte.
7. L SPK (uscita allo speaker non attivo).
Uscita audio amplificata per speaker non attivo.
8. DC 8V (presa ingresso alimentazione).
9. Speaker non attivo.
10. L SPK (ingresso segnale audio speaker
non attivo).
11. Porta speaker non attivo.